Double Glazing Window Repair
Over time, double glazing can develop problems. For instance it might become difficult to open the windows or have doors that get stuck. Fortunately these problems can be solved easily.
Many homeowners attempt to solve these issues on their own but this should be left to experts. If you attempt to fix this without the proper tools and experience could result in damage.
Broken Panes
A broken window pane can be a frustrating and annoying issue. It could let cold or hot air into your home, and leave a gap that allows dirt or moisture to get in. This can also reduce your energy efficiency as your AC or furnace will need to work harder to keep your home cool. Depending on the season and whether you have single or double-pane windows, you might be able to temporarily repair the damage by using silicone sealant. However the final solution will require expert assistance.
A window that is cracked can be fixed using high-quality tape. A tape strip placed over a crack can prevent it from worsening. A crack that is large enough to penetrate the glass or is too large to cover with tape, will need to be replaced completely.
Broken glass can be caused by many things: a pebble from a lawnmower that lands on the window; drinking a drink that is set too heavily on a glass-topped table; or a pet's excited leap when you open the door. The frames of your windows can change over time and crack the packaging material that holds the glass sheets.
If you've broken a glass pane, wear thick work gloves and put a cardboard box nearby to catch the shards. Remove the sash and work on a level surface, such as the table. Wear a mask so as not to breathe in the glass shattering.
Once the old glass is removed, clean any varnish or paint from the window's frame. You can use a heating gun to soften old glazing putty or the metal points which held the glass in position.
Then, you can measure the opening of the new glass. To allow for expansion and contraction you should always purchase the replacement glass slightly smaller than the opening. You can request that your local hardware store or your home center cut it according to these measurements.
Once you have your new glass, you can press it into the frame. If there are gaps, you can fill them with silicone caulk which is available at a home improvement store. Then, smooth the caulk with a putty knife. Attach glazier's tips to the corners of the glass frame about every six inches, so that they secure the pane in the frame.
Condensation
No matter if your double-glazed windows are new or old it's common for them to experience condensation. This is particularly true in winter, when colder air meets warmer glass. While window repair can cause a problem, it's not generally a problem. This is because condensation on windows actually means that your double glazing is functioning properly.
However, it could be a sign that the seal is not working and water is flowing through the gaps between the window panes. If you notice a milky look on your window or if water beads appear on its surface, this needs to be addressed to stop mould, mildew, or any further damage.
Luckily condensation can be gotten rid of quite easily. A technician will drill tiny holes in the window's frame to allow the trapped moisture escape. This is referred to as defogging. It may also be used to eliminate stains that are caused by moisture that has been trapped.
The defrogging process does not solve the root cause of a faulty window seal. It might not even work even if the condensation has disappeared, because the compromised air between the panes could still be there. This could mean that you still not get as much insulation from your windows as you would like to.
If you've noticed water growing in your windows, it's a good idea to speak with an expert as quickly as you can to figure out what the next steps to take be. They could suggest solutions such as adding vents in the windows to let fresh air to circulate but don't allow warm air to escape.
It is the last thing you want for your double-glazing to go down. This is especially true when it can be costly to replace. With the right skills, equipment and experience, you can repair your double-glazed window to keep it in good condition for many years. Contact us today if you need double repair work for your double glazing. We provide a range of services ranging from replacing one or more panes of tempered glass to installing energy efficient upgrades.
Leaks
Leaks can cause damage and are costly to fix. This can be expensive to repair and can be an indication of more serious issues within your property, like dry rot or mould. This is why it's crucial to fix a leak as soon as possible.
If you experience an air draught emanating from your double glazed windows, it's most likely that the seal inside the sealed unit has failed. This could also mean that there is no longer any gas called argon in the panes of glass which is used for insulation purposes. This can be fixed by an expert technician who will reseal the window.
Double-glazed windows may become cloudy or misty due to dirt. This is usually a sign that the seal is getting worn out and the glass must be cleaned. A specialist can do this by using high-pressure water jets to swiftly clean the glass.
If condensation forms between the two panes of your double glazing, this is an indication that the seal is leaky and there isn't any argon between the glass. This is a serious problem and could mean that your double glazing is not insulates your home as it should. It can be fixed by replacing the glass unit, but it must be done sooner rather than later, as the performance of your double-glazed window will be affected.
If you have double-glazed windows under warranty, you should contact their installer and report any problems with the units or sealing of the glass. It is highly unlikely that the warranty will be able to address these issues. If you attempt to alter the seals with the units or attempt to make any repairs yourself, this could invalidate your warranty, which is why you should always leave these repairs to the experts. We suggest that you employ a double glazing repair specialist.
Weather Damage
In areas of extreme weather conditions, double-glazed windows require a sturdy frame that can hold the glass panes in place. Ice snow high winds, and storms that are tumultuous can cause damage to your windows. Call a professional to repair double glazing if you notice cracks, dents or holes.
If you notice that water is running down the sides of the window, it may be an indication that the inner seal has been damaged and is allows water into your home. Additionally the uPVC or aluminum window frame could be warping or bending. To fix this, you'll need to replace the window seal and then re-insert it into the frame.
Window seals help to ensure that your double glazed windows are airtight, and prevent heat from escaping your home, while also preventing condensation between glass panes. Window seals, which help keep the glass in place are made from uPVC or aluminum. You can experience problems like the loss of energy and draughts if the window seals fail.
Misting windows are a frequent issue that is the result of the gas used to insulate the double-glazed window failing. The argon gasses keep the glass in place and create an airtight sealing, but if it is damaged or worn out, the gases could escape. The gases released by argon can lead to condensation between the glass panes.
The issue can be solved by replacing the window seal, re-inserting the glass and applying an anti-fogging solution to prevent condensation from occurring in the future. It is recommended to hire an expert to complete the work for you.
Double-glazed windows are essential but they can also be damaged and require to be repaired. The majority of windows can be repaired without the need to replace them. To do this, it's an ideal idea to have some basic tools at hand. You'll need gloves to protect yourself, a tape measure, scotch tape or a transparent film, nail polish, and a sheet of plastic which can be cut to size.